LED Display Soft Module
Customization; support
Module Size：320*160mm
Structure: Customization
Usage: showroom, exhibition, meeting room, auditorium
Pixel pitch:P1.25/P1.53/P1.86/P2.0/P3.0
LED Display Soft Module for Indoor Flexible Engineering Applications
From an engineering perspective, an LED Display Soft Module is not selected for resolution alone. Its real value lies in how reliably it adapts to non-planar structures while maintaining electrical stability and visual consistency over long operating cycles.
This product is designed specifically for indoor flexible display projects, where curved surfaces, cylindrical columns, or irregular architectural forms make rigid LED modules impractical.
Engineering Logic Behind the Soft Module Design
Unlike traditional rigid modules, the soft module structure is optimized to work under controlled mechanical stress. During installation on curved or wavy surfaces, the module must tolerate bending without affecting solder joints, LED alignment, or signal integrity.
For this reason, the module adopts a flexible substrate combined with controlled magnetic mounting. This allows installers to adjust curvature on-site while keeping the module surface flat and visually uniform after installation.
From a system integration standpoint, this reduces alignment errors and shortens installation time, especially in complex indoor projects.
Pixel Pitch Selection Based on Viewing Conditions
This series covers multiple pixel pitches (R1.25 to R2.5), allowing engineers to match resolution to real viewing distance, not marketing preference.
In practice:
- Smaller pitches are applied to close-view indoor environments such as exhibition halls or brand experience centers
- Larger pitches are used where curvature dominates visual impact rather than fine detail
This selection logic is widely applied in projects using China LED Display Soft Module solutions for commercial and architectural interiors.
Electrical Stability and Long-Term Operation
For indoor displays operating for extended periods, electrical stability has a direct impact on image consistency and system lifespan.
This module series is designed with controlled power consumption per module and a high refresh rate to ensure stable grayscale performance and flicker-free display under camera recording conditions. These characteristics make it suitable for permanent indoor installations rather than temporary rental use.
Installation and Maintenance
Magnetic adsorption mounting is not only an installation feature but also a maintenance solution.
In real projects, engineers often need to:
- Replace individual modules without dismantling the full structure
- Perform alignment corrections after long-term operation
- Service displays installed in confined indoor spaces
This modular design significantly reduces downtime for system integrators and maintenance teams working with LED Display Soft Module suppliers.
Technical Specifications
The following parameters are measured under standard indoor operating conditions and are provided for engineering reference and project planning.
| Item | R1.25 | R1.53 | R1.86 | R2.0 | R2.5 |
|---|---|---|---|---|---|
| Module Size (mm) | 320 × 160 | 320 × 160 | 320 × 160 | 320 × 160 | 320 × 160 |
| Resolution (dots) | 256 × 128 | 208 × 104 | 172 × 86 | 160 × 80 | 128 × 64 |
| Cabinet Dimension (mm) | 640 × 480 | 640 × 480 | 640 × 480 | 640 × 480 | 640 × 480 |
| Scan Mode | 1/64 | 1/52 | 1/43 | 1/40 | 1/32 |
| Viewing Angle | H / V ≥110° | H / V ≥110° | H / V ≥110° | H / V ≥110° | H / V ≥110° |
| Flatness | ≥98% | ≥98% | ≥98% | ≥98% | ≥98% |
| Gray Scale (bit) | ≥13 | ≥13 | ≥12 | ≥12 | ≥12 |
| Color Temperature | 2000K – 9500K | 2000K – 9500K | 2000K – 9500K | 2000K – 9500K | 2000K – 9500K |
| Contrast Ratio | 5000:1 | 5000:1 | 5000:1 | 5000:1 | 5000:1 |
| IP Rating | IP30 | IP30 | IP30 | IP30 | IP30 |
| Refresh Rate (Hz) | ≥3840 | ≥3840 | ≥3840 | ≥3840 | ≥3840 |
| Brightness (cd/m²) | ≤500 | ≤500 | ≤500 | ≤500 | ≤500 |
| Peak Power (W/PCS) | ≤25 | ≤15 | ≤13.5 | ≤12 | ≤12 |
| Average Power (W/PCS) | 10–15 | 8–10 | 5–10 | 5–10 | 5–10 |
Customization Capability for Project Requirements
Most indoor flexible display projects require adaptation rather than standard layouts. This product supports Customized LED Display Soft Module solutions based on:
- Curvature radius and installation geometry
- Pixel pitch and content requirements
- Structural and maintenance constraints
This controlled customization ensures predictable performance while meeting design intent.
Procurement and Supply Considerations
For project-based purchasing, consistency and long-term availability are critical.
Engineering contractors and integrators typically work with verified LED Display Soft Module suppliers that can support batch consistency, technical documentation, and long-term spare part availability. In larger installations, wholesale LED Display Soft Module procurement helps maintain uniform performance across multiple display areas.
From an engineering perspective, an LED Display Soft Module is selected for its ability to integrate into complex indoor structures while maintaining electrical stability and visual consistency throughout its service life.
This product provides system integrators and project contractors with a reliable solution for indoor flexible LED display applications where rigid modules are not suitable.
If you are planning to build an unique indoor shaped vedio wall, you are welcome to discuss the customized display solution with us.
Hot Tags: led display soft module, China led display soft module manufacturers, suppliers, factory, thin flexible led screen, flexible led screen price, led screen p2 5, large flexible led screen, lsbb018 gd, flexible led mesh screen
Send Inquiry
